Re: Which LC do you recommend?

[Mike Spurgeon <mike@spurgeon.net>]

no@spam.com wrote:
> 
> Try removing the two pin jumper block from location J19 on the logic
> board. J19 is located on the right hand side of the PDS expansion slot on
> your Quadra 605's motherboard (a.k.a. logic board). It's between the
> expansion slot and the PRAM lithium battery holder.

That was what I planned after all the comments...

I bought the first 605 specifically for the IIe card, and then
found out that turning off 32-bit addressing wasn't an option.

Since the jumper seems to be the only difference between the two
models, that might be the cure.

If it works, you want a 605?