[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: HELP with UniDisk 3.5'



If the computer been in smoking conditions you might consider cleaning up all contacts on
motherboard and chips.  I got this Apple 2e once from a smoking user.  The unit was twice
as dark cause of  layer of tobacco slime.  When I tried to turn it on the display flickered
and displayed some I/O error messages.  I cleaned whole motherboard and removable chips and
it worked flawlessly after that .  Hope this helps.

Lancyne Cel�r wrote:

>         Hi all on the CSA2!
>
>         Recently I acquired a super-used ][c (the fourth now) that came to me with two
> Unidisks. It was taken from an office (its user used to smoke while working -
> there was a mess of ashes inside the keyboard and the case).
>         The good new is that it has the new roms, even if the motherboard is older than
> the other I got. The bad news are that the machine is somehow corrupted inside.
>         When in 80-col mode it shows some " flickering on the screen, in HGR some
> pixels remains lightened and it refuses nine times on ten to load prodos. When I
> try to reboot (warm or cold) the machine, with prodos the message is
> *relocation/configuration error* and it hangs up, with or without unidisk
> connected, even with the 3.5' as boot. The few times it started with diskware
> 1.1 (you know where can I download a newer version? this doesn't recognize my
> ][c, he sez it's a ][e...) I have rightly formatted a 3.5' and putted prodos on
> it. When I reset it with open-close apple-ctrl-reset it shows the message "RAM
> 0010000", perhups with some 0 more or less. My other ][c's keep happily joking
> with HGR when I do it them.
>
>         Any of you know what this could be? Some memory chip gone?
>         Do you know what is the ROM that allows 3.5's use? I think I've recognized it,
> it's the only dated 1985, unlike the other dated 1982/83, like my others ][c
> have. I've seen that W1 and W2 have been manipulated on the mobo, it's perhups
> to allow the ROM to work? Should I change the ROMS? How?
>
> Sorry for the hundred questions... but it's important, and YOU are the gurus! :)
>
> Another... Dr. Stephen Buggie, if you're listening, can you email me the
> instructions? I've lost yours... and I need also more ROMs to upgrade my other
> ][c! :)
>
> Thanks for all... just for reading 'til here, too.
> --
> Lance
> (Lancyne Cel�r)[WMU][MFC]
> http://jump.to/kota (wuz http://get.to/Lance)
> ICQ UIN: 3956**31
>
> "Hallo Victoria, so glad to see you, my friend"
> Dream Theater