Re: Q: Pinout of output on a VIDEX Videoterm card??

[Jan <jan.kronlund@ahlsellref.fi>]

Thanks for the info!
Jan

Wayne Stewart wrote:

> Do you have the soft video switch assembly or are you simply going
> to connect the card directly to a monitor?
> If connecting directly to a monitor then only the top two of the 5 pins
> are used with the first pin going to the outside of the RCA jack.and the
>
> second  the center. the others aren't used with this setup.
> Connecting directly to a monitor means you won't be getting a signal
> through the card unless you're in 80 columns and when in 80 columns
> there's no new signal coming out the built-in video jack. When I had
> that setup I used a manual switch to change connections since changing
> video connections a couple hundred times a day was a bit tiring. Coming
> accross a Soft switch assemble was a pretty happy event at the time
>
> Jan wrote:
>
> > I have the card, but  it's missing the output cable, so info
> > appreciated.
> > TIA
> > Jan