Re: Disk Creation Question

[supertimer@aol.com (Supertimer)]

"krisp" <krisp@madcrew.net> wrote:

>Is there any way i can send a disk image to my IIgs via the gs serial port
>in text mode (ie, in "Moniter Dump" format) and write it to a disk? I have
>had no luck using ADTgs (it spits me to the * prompt with a BRK 00 at $470A)
>and ADT, which runs, wont use the serial port. I can send text from my
>laptop to the IIgs via NULL modem quite eaisly, and was just wondering if
>there was a way i could send terminal software over, because i have none.

That's like reinventing the wheel.

Why not just send a couple of dollars to http://www.crl.com/~joko
Shareware Solutions II and get a freeware terminal program on
disk.  That way, you can ymodem or zmodem the file across.
You'll probably need binary mode.  Text mode usually scrambles
program files.

Look through the disk library at Shareware Solutions II to find a
terminal program.

Yes, you do end up spending a few dollars on the IIGS for the
disk, but it will save you hours of headache.