Re: Carte Blanche fails to program...Help needed

[Nama <forums6000@mac.com>]

Here is the entire log:

Welcome to iMPACT
iMPACT Version: 12.3
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
GUI --- Auto connect to cable...
// *** BATCH CMD : setCable -port auto
AutoDetecting cable. Please wait.
PROGRESS_START - Starting Operation.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
 Source driver files not found.
The Platform Cable USB is not detected. Please connect a cable.If a
cable is connected, please disconnect
and reconnect to the usb port, follow the instructions in the 'Found
New Hardware Wizard', then retry
the Cable Setup operation.
Cable connection failed.
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
 Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997
- 2006 Build Date: Oct 16 2006 X86 32bit SYS 12:35:07, version = 811.
 LPT base address = 03BCh.
 ECP base address = FFFFFFFFh.
Cable connection established.
PROGRESS_END - End Operation.
Elapsed time =      1 sec.
Attempting to identify devices in the boundary-scan chain
configuration...
INFO:iMPACT - Current time: Sun Feb 13 09:47:21 2011
// *** BATCH CMD : Identify -inferir
PROGRESS_START - Starting Operation.
Identifying chain contents...INFO:iMPACT:1588 - '0':The part does not
appear to be Xilinx Part.
'0': : Manufacturer's ID =Unknown , Version : 15
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
PROGRESS_END - End Operation.
Elapsed time =      6 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "C:/Documents and Settings/
PRL/Desktop/250e Bitstream files/JAT1_250.bit"
'1': Loading file 'C:/Documents and Settings/PRL/Desktop/250e
Bitstream files/JAT1_250.bit' ...
done.
INFO:iMPACT:1777 -
Reading C:/Xilinx/12.3/ISE_DS/ISE/spartan3e/data/xc3s250e.bsd...
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the
bitstream stored in memory,
but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc3s250e successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
INFO:iMPACT - Current time: Sun Feb 13 09:48:21 2011
// *** BATCH CMD : Program -p 1
PROGRESS_START - Starting Operation.
INFO:iMPACT:583 - '1': The idcode read from the device does not match
the idcode in the bsdl File.
INFO:iMPACT:1578 - '1':  Device IDCODE :
00000000000000000000000000000000
INFO:iMPACT:1579 - '1': Expected IDCODE:
00000001110000011010000010010011
PROGRESS_END - End Operation.
Elapsed time =      0 sec.