[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Carte Blanche fails to program...Help needed
"Nama" <forums6000@mac.com> wrote in message
6ed15fc2-1ab6-4968-a7e6-5fafdde392b4@o14g2000prb.googlegroups.com">news:6ed15fc2-1ab6-4968-a7e6-5fafdde392b4@o14g2000prb.googlegroups.com...
> Here is the entire log:
>
> Welcome to iMPACT
> iMPACT Version: 12.3
> // *** BATCH CMD : setMode -bs
> // *** BATCH CMD : setMode -bs
> // *** BATCH CMD : setMode -bs
> // *** BATCH CMD : setMode -bs
> GUI --- Auto connect to cable...
> // *** BATCH CMD : setCable -port auto
> AutoDetecting cable. Please wait.
> PROGRESS_START - Starting Operation.
> Connecting to cable (Usb Port - USB21).
> Checking cable driver.
> Source driver files not found.
> The Platform Cable USB is not detected. Please connect a cable.If a
> cable is connected, please disconnect
> and reconnect to the usb port, follow the instructions in the 'Found
> New Hardware Wizard', then retry
> the Cable Setup operation.
> Cable connection failed.
> Connecting to cable (Parallel Port - LPT1).
> Checking cable driver.
> Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997
> - 2006 Build Date: Oct 16 2006 X86 32bit SYS 12:35:07, version = 811.
> LPT base address = 03BCh.
> ECP base address = FFFFFFFFh.
> Cable connection established.
> PROGRESS_END - End Operation.
> Elapsed time = 1 sec.
> Attempting to identify devices in the boundary-scan chain
> configuration...
> INFO:iMPACT - Current time: Sun Feb 13 09:47:21 2011
> // *** BATCH CMD : Identify -inferir
> PROGRESS_START - Starting Operation.
> Identifying chain contents...INFO:iMPACT:1588 - '0':The part does not
> appear to be Xilinx Part.
> '0': : Manufacturer's ID =Unknown , Version : 15
> INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
> ----------------------------------------------------------------------
> ----------------------------------------------------------------------
> done.
> PROGRESS_END - End Operation.
> Elapsed time = 6 sec.
> // *** BATCH CMD : identifyMPM
> // *** BATCH CMD : assignFile -p 1 -file "C:/Documents and Settings/
> PRL/Desktop/250e Bitstream files/JAT1_250.bit"
> '1': Loading file 'C:/Documents and Settings/PRL/Desktop/250e
> Bitstream files/JAT1_250.bit' ...
> done.
> INFO:iMPACT:1777 -
> Reading C:/Xilinx/12.3/ISE_DS/ISE/spartan3e/data/xc3s250e.bsd...
> INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the
> bitstream stored in memory,
> but the original bitstream file remains unchanged.
> INFO:iMPACT:501 - '1': Added Device xc3s250e successfully.
> ----------------------------------------------------------------------
> ----------------------------------------------------------------------
> INFO:iMPACT - Current time: Sun Feb 13 09:48:21 2011
> // *** BATCH CMD : Program -p 1
> PROGRESS_START - Starting Operation.
> INFO:iMPACT:583 - '1': The idcode read from the device does not match
> the idcode in the bsdl File.
> INFO:iMPACT:1578 - '1': Device IDCODE :
> 00000000000000000000000000000000
> INFO:iMPACT:1579 - '1': Expected IDCODE:
> 00000001110000011010000010010011
> PROGRESS_END - End Operation.
> Elapsed time = 0 sec.
I don't know if I can help but here is an impact log of a successful
programming of the CB using impact 11.1 and a Digilent Parallel cable:
<log start>
iMPACT Version: 11.1
iMPACT log file Started on Sat Feb 12 22:53:00 2011
Welcome to iMPACT
iMPACT Version: 11.1
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
GUI --- Auto connect to cable...
// *** BATCH CMD : setCable -port auto
AutoDetecting cable. Please wait.
PROGRESS_START - Starting Operation.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
Source driver files not found.
The Platform Cable USB is not detected. Please connect a cable.If a cable
isconnected, please disconnect
and reconnect to the usb port, follow the instructions in the 'Found
NewHardware Wizard', then retry
the Cable Setup operation.
Cable connection failed.
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997 -
2006 Build Date: Oct 16 2006 X86 32bit SYS12:35:07, version = 811.
Cable connection failed.
Connecting to cable (Parallel Port - LPT2).
Checking cable driver.
Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997 -
2006 Build Date: Oct 16 2006 X86 32bit SYS12:35:07, version = 811.
Cable connection failed.
Connecting to cable (Parallel Port - LPT3).
Checking cable driver.
Driver windrvr6.sys version = 8.1.1.0. WinDriver v8.11 Jungo (c) 1997 -
2006 Build Date: Oct 16 2006 X86 32bit SYS12:35:07, version = 811.
LPT base address = E800h.
ECP base address = E480h.
Cable connection established.
PROGRESS_END - End Operation.
Elapsed time = 1 sec.
Attempting to identify devices in the boundary-scan chain configuration...
INFO:iMPACT - Current time: Sat Feb 12 22:53:07 2011
// *** BATCH CMD : Identify
PROGRESS_START - Starting Operation.
Identifying chain contents...'0': : Manufacturer's ID = Xilinx xc3s250e,
Version : 1
INFO:iMPACT:1777 -
Reading G:/Win7pro-Xilinx/11.1/ISE/spartan3e/data/xc3s250e.bsd...
INFO:iMPACT:501 - '1': Added Device xc3s250e successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
PROGRESS_END - End Operation.
Elapsed time = 0 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file
"G:\Xilinx\11.1\CB250Project\cartblanche1.bit"
'1': Loading file 'G:\Xilinx\11.1\CB250 Project\cartblanche1.bit' ...
done.
INFO:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the
bitstream stored in memory,
but the original bitstream file remains unchanged.
UserID read from the bitstream file = 0xFFFFFFFF.
INFO:iMPACT:501 - '1': Added Device xc3s250e successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
INFO:iMPACT - Current time: Sat Feb 12 22:54:36 2011
// *** BATCH CMD : Program -p 1
Maximum TCK operating frequency for this device chain: 0.
Validating chain...
Boundary-scan chain validated successfully.
'1': Programming device...
PROGRESS_START - Starting Operation.
done.
'1': Reading status register contents...
CRC error : 0
Decryptor security set : 0
DCM locked : 1
DCI matched : 1
legacy input error : 0
status of GTS_CFG_B : 1
status of GWE : 1
status of GHIGH : 1
value of MODE pin M0 : 1
value of MODE pin M1 : 0
value of MODE pin M2 : 0
value of CFG_RDY (INIT_B) : 1
DONEIN input from DONE pin : 1
IDCODE not validated while trying to write FDRI : 0
write FDRI issued before or after decrypt operation: 0
Decryptor keys not used in proper sequence : 0
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 0111 1001 1000 0000 0000 0000 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT - '1': Programing completed successfully.
INFO:iMPACT - '1': Checking done pin....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time = 4 sec.
<log end>
I noticed that in the first section (before the first set of dashed lines)
that your setup isn't recognizing the FPGA as a Xilinx part. Mine is.
And...
Your ECP base address = FFFFFFFFh. Mine = E480h. Maybe you need to change
some settings in your parallel port.
Also, when starting impact and you get to the place where it prompts you
with "Do you wnat to attach an SPI or BPI PROM to this device?" always click
on "No".
Charlie