Re: SCSI ID connector

[brian.hammack@rook.wa.com (Brian Hammack)]

 John chanted almost zenlike:

     | connector.  The old pins were three pairs of standard header
     | pins .1" apart, but these are closer together and a little short

Never mind the 'clicker' from the old drive, you're going to have to
use jumpers to set the ID, which is simple but if you need to change
the ID you have to get at the drive (open case, whatever) each time.

The pins represent ID's of 1, 2, and 4.  Empty (:::) is 0, and
combinations of jumpers represent the numbers 1 through 7 -- for
example, three is (88:) and six is (:88).

 * 2qwk! 2.04 * Flattery is the food of fools.  Darn, I'm hungry....