[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IIc+ Ports <-> PC Transfer Help
- Subject: Re: IIc+ Ports <-> PC Transfer Help
- From: Paul Grammens <pgrammen@sonic.net>
- Date: 1998/11/27
- Newsgroups: comp.sys.apple2
- Organization: Sonic,Santa Rosa CA,http://www.sonic.net
- References: <73mi6g$9rs$1@ionews.ionet.net>
- Reply-to: pgrammen@sonic.net
Carl E. wrote:
>
> I have an apple IIc+ that I've been trying to connect to a PC with ADT2222.
> I can't establish any communication with the IIc+ and PC with a null modem
> cable.
>
> Here's what I have:
>
> Apple IIc+ [Modem Port] <round connector---- Apple serial cable-----9 pin
> d-sub> [Serial Port] PC
>
The IIc+ serial port LOOKS the same as a Mac or IIGS port, but it's NOT.
See the faq for the pinouts. You can buy an official cable or make your
own- cut one end off a Mac printer cable and wire it to a DB-9 or DB-25
connector to match your IBM serial port.
-Paul