Re: IIc+ Ports <-> PC Transfer Help

["Carl E." <cespo_REMOVE@ionet.net>]

Do I still type IN#2 to get the port to listen?

Won't putting a laplink cable on the end of the 9-pin d-sub convert it to a
null-modem like cable?  I've tried this as well.

Thanks,
Carl

Paul Grammens wrote in message <365F0AFF.34B4@sonic.net>...
>Carl E. wrote:
>>
>> I have an apple IIc+ that I've been trying to connect to a PC with
ADT2222.
>> I can't establish any communication with the IIc+ and PC with a null
modem
>> cable.
>>
>> Here's what I have:
>>
>> Apple IIc+ [Modem Port] <round connector---- Apple serial cable-----9 pin
>> d-sub> [Serial Port] PC
>>
>
>The IIc+ serial port LOOKS the same as a Mac or IIGS port, but it's NOT.
>See the faq for the pinouts. You can buy an official cable or make your
>own- cut one end off a Mac printer cable and wire it to a DB-9 or DB-25
>connector to match your IBM serial port.
>-Paul