Re: Shiva Fastpath 4 - MyNetwork.txt (0/1)

["Charles S. Herrera" <cherrera@ix.netcom.com>]

Probably the best place to ask this is in comp.sys.mac.comm.  By the way
the 'attached file' did not show up in your post.

Configuration for AppleTalk only shouldn't be too hard.  I assume you
have the latest config software from the shiva download site?

Charles



Michael Crane wrote:

> I recently purchased one of these and would like to get a manual for
> it.  A paper/electronic copy would be fine with me.  The company that
> made them (Shiva) barely acknowledges their existance, much less gives
> any idea how to get a manual for them.  Furthermore, if anybody out
> there has successfully configured one of these boxes to link a
> Localtalk network to an Ethernet network, I could use a bit of help
> getting it configured.  The attached file shows my current hardware
> configuration.  As nearly as I can tell, the hardware connections are
> correct - I just don't have the Fastpath configured for the two
> networks to see and talk with each other.
>
> [the attached document is best viewed using a mono-spaced font such as
> Courier or Monaco.  in fact, it probably won't make much sense
> otherwise.]