Re: Apple //c+ Users Manual

[Mike Maginnis <mmaginnis@gmail.com>]

On Dec 16, 5:28 pm, Steven Hirsch <snhir...@gmail.com> wrote:
> On 12/15/2010 09:32 PM, James Littlejohn wrote:
>
> > I not sure if Mike did or not but, I had a full write up on A2Central
> > over the REV of boards and chips that were best for the acceleration.
>
> I'm pleased to say that my IIc + is a Rev A with NCR ASIC.  I replaced the
> 16Mhz. can oscillator with a 32Mhz. part and it seems to be running fine at
> 8Mhz. - with no other changes required. :-)
>
> Thanks again for the nice writeup!
>
> Steve

My IIc+ has the same ASIC.  Sadly, my soldering skills are
nonexistent, so I will have to be content with 4 MHz...  But it's good
to know that the upgrade *could* be done...

- Mike