Re: Apple //c+ Users Manual

[David Schmenk <dschmenk@gmail.com>]

On Dec 17, 8:55 am, Mike Maginnis <mmagin...@gmail.com> wrote:
> On Dec 16, 5:28 pm, Steven Hirsch <snhir...@gmail.com> wrote:
>
> > On 12/15/2010 09:32 PM, James Littlejohn wrote:
>
> > > I not sure if Mike did or not but, I had a full write up on A2Central
> > > over the REV of boards and chips that were best for the acceleration.
>
> > I'm pleased to say that my IIc + is a Rev A with NCR ASIC.  I replaced the
> > 16Mhz. can oscillator with a 32Mhz. part and it seems to be running fine at
> > 8Mhz. - with no other changes required. :-)
>
> > Thanks again for the nice writeup!
>
> > Steve
>
> My IIc+ has the same ASIC.  Sadly, my soldering skills are
> nonexistent, so I will have to be content with 4 MHz...  But it's good
> to know that the upgrade *could* be done...
>
> - Mike

This sounds like a KFest session.