Re: Hopefully last dumb newbie question.

[CUTjefbla@bconnex.net (Jeff Blakeney)]

On 15 Jun 1998 17:34 -0500, spec@vax2.concordia.ca (Mitchell Spector)
wrote:

>    Good question. I always thought it was there to disable hardware
>shadowing, but apparently it functions the same way as on the ROM 00
>and 01 machine -- you manually have to activate. I've been going by
>how my ROM 3 acts as the norm.

It should be disabled by default, even in the ROM 3 if my memory
serves me correctly.

>    My ROM 3 board and a few others are slightly different, the 
>programmer CDA's are *always* present in the Classic Desk Menu,
>and all conventional methods of removal will not work (it has
>something to do with the state of certain RAM chips when you
>cold-boot the machine). 

I believe, again this is from my poor memory as my archived messages
are only on my backup right now, there is a jumper on the motherboard
of the ROM 3's that allows you to either have the programmer's CDA's
always present or to not show up at all.  In the latter case, I
believe they act just like on the ROM 00 and ROM 01 machines (meaning
you can enable them and disable them using the check box in the
SetStart CDEV).

I could be wrong and I'm sure someone here can correct me if I did.

=== I've had enough SPAM.  Cut the obvious from my address to email me. ===
         Jeff Blakeney - Dean of the Apple II University on Delphi