Re: Thanks alot for the File Trans. help! 1 more ??....(How to trans. Multi. files?)

[Rubywand <rubywand@swbell.net>]

Jeff Blakeney writes ...
> 
> On 1 Apr 1998 00:21:25 GMT, Anonymous <x.y@tennis.net> wrote:
> >Go to FILE, RECEIVE ....
> 
> You don't need to tell Spectrum to receive a file if you are using
> Zmodem transfers.  Just make sure that you have auto Zmodem receives
> are turned on in Spectrum. ....
> 
> >The problem with this is that I cannot transfer multiple files.  Is there
> >any way to transfer more than one file at a time?
> 
> The easiest way for you to do it is, on the Win95 machine, ....
> 
> For example, if you copied the files you wanted transfered into a
> directory called Temp on drive C: then the contents of the Filename
> line edit would look like this:
> 
>      C:\Temp\*.*
> 
> .... If you only wanted to transfer certain types of files you can change > the *.* to *.SHK for ShrinkIt files ....

     What a lot of great info! I've been running to my GS to start
Receives when all that's needed is to set Spectrum's Auto Receive. Even
better, you cleared up the 'mystery' of sending multiple files under
HyperTerm. Thanks!

     One thing you may be able to clear up: When files are sent (via
z-modem) from the GS, HyperTerm receives them okay; but, it does not
automatically exit the Receive sequence. I usually just click
HyperTerm's Cancel button. (HT emulation is set for TTY.)  Is there a
way around this?



Rubywand