[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Apple Imagewriter LQ
- Subject: Re: Apple Imagewriter LQ
- From: supertimer@aol.com (Supertimer)
- Date: 1998/03/25
- Newsgroups: comp.sys.apple2
- Organization: AOL http://www.aol.com
- References: <DsHR.8229$g_1.297429@news.internetMCI.com>
"bbendele" <bbendele@MCI2000.com>
>I am having difficulty setting up an Imagewriter LQ on my //gs. I am using
>Appleworks 5.0 and system 6.0.1 from a hard drive
Did your ImageWriter II print properly before? If it did, this eliminates a
hardware problem in the computer.
>The Imagewriter LQ self tests OK but
>when I try to print to it My information just dumps to the printer and
>nothing happens. Do I need a special printer cable? I am using the one I
>used with my IW//. Are there special code settings that need to be
>changed?? Any help would be a appreciated. Thanks!!!
The LQ codes might be different. One way to tell if the LQ is working
is to go into BASIC and do a PR#1 (if connected to the printer port).
Everything will then go on the printer. If there is printer output, the LQ
is fine and just requires the right codes from AW 5.0.