[no subject]

22 /DMA
23 INT OUT goes to 28 INT IN but is not used on the card
24 DMA OUT goes to 27 DMA IN but is not used on the card
25 +5V
26 Ground
32 /INH
33 -12V
34 -5V
37 Q3 (asymmetrical 2 MHz clock)
40 Phi0 (1 MHz clock)
50 +12V

I imagine the TransWarp GS has similar requirements.

Of these signals, only +5V and Ground are available at the CPU.  The
Phi0 signal is not available directly, only while the system is running
in slow mode.

-- 
David Empson
dempson@actrix.gen.nz
Snail mail: P.O. Box 27-103, Wellington, New Zealand