Re: Apple IIgs and Mac IIsi AppleTalk connection. Help needed.

[goble@kigateway.eastend.com.au (David. E. Goble)]

Laer Haider <laer@nospam-customized.com> wrote:

> I've connected the IIgs to the Mac via Slot 1 (serial printer port) on
> the IIgs and connected to the serial port on the Mac, and I installed
> the AppleTalk drivers on the IIgs.  AppleTalk is "on" in the control
> panel (had to move the RAMFast card to slot 2), and slot 1 is set to
> "your card."  The IIgs doesn't see anything either.  Is there a
> special cable needed for this AppleTalk connection?
> 
> The Mac is a vanilla IIsi with 9MB RAM, 60MB HD, and monochrome
> monitor.  It has an Ethernet card installed, which seems to be
> functioning.
>
Hi all;

If you have installed all the software needed,that is all the drivers,
CDev, FSTs...etc on the AppleIIGs and reset slot 1 to AppleTalk.

On the Mac, do you have AppleTalk on and do you have File sharing on.

Also, you will need to set up the users & groups, to tell who can
connect...etc

If you need more information, feel free to email me at the email
adddress below.

Anyway I hope this helps.

-- 
Regards from :           David. E. Goble
                         goble@kin.on.net
                 http://www.eastend.com.au/~goble
       C/o Po Penneshaw Kangaroo Island South Australia 5222