[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Need cable pinout for duodisk cable
- Subject: Re: Need cable pinout for duodisk cable
- From: "Peter Sheerin" <noreply@pushback.com>
- Date: 1997/12/18
- Newsgroups: comp.sys.apple2
- References: <677qt2$4n7$1@nntp2.ba.best.com> <67c7md$ulk$4@lynx.unm.edu>
Actually, someone did mail them to me, and then I found the pinouts in an
Apple 2 FAQ.
The cable cost me $50 (more than double what the //e, duodisk and monitor
cost me), but it works!
stephen e buggie wrote in message <67c7md$ulk$4@lynx.unm.edu>...
>Mitch Spector (Montreal, French Canada) has the DuoDisk pinouts.
>
>Mitch ----- could you append them here?
>
>
>Steve Buggie
>
>
>
>
>
>
>Peter Sheerin (noreply@pushback.com) wrote:
>: I just acquired an Apple IIe in what appears to be fully-working
condition,
>: including a monochrome monitor and a duodisk, but there was no cable with
>: the disk drive, so I'm unable to test it yet.
>
>: The back of the duodisk has a DB-25 female connector, but the I/O card in
>: the CPU has a DB-19 female connector. On advice I now know to be wrong I
had
>: a DB-19 to DB-19 cable made for me, so I need to know the pin mapping so
>: that I can get the cable modified so that it will work.
>
>: Where can I find the specs?
>
>