Re: MONITOR IIC: Image slightly tilted; How to fix?

[aw133@lafn.org (James Poore)]

In a previous article, pa.schaefer@fz-juelich.de (Patrick Schaefer) says:

>Mark Piazza wrote:
>> 
>> I am almost sure that if you look on the circuit board that the focus and v
>> + h-hold knobs are, on the inside there will be a small trimmer for tilt,
>> most new Mac's today have them in the setup, (at least the AppleVision at
>> school does).  
>
>The //c Monitor is a monochrome monitor, not color!
>(Monochrome monitors use magnetic geometry corrections, not correction
>coils)
>
>
>> ... Also I usually short the CAPs with a piece of
>> wire (from a safe distance) and wrap the wire around the leads to make sure
>> it doesn't recharge some how. 
>
>It's better to use a 100 ohm resistor.