Re: MONITOR IIC: Image slightly tilted; How to fix?

[Patrick Schaefer <pa.schaefer@fz-juelich.de>]

Mark Piazza wrote:
> 
> I am almost sure that if you look on the circuit board that the focus and v
> + h-hold knobs are, on the inside there will be a small trimmer for tilt,
> most new Mac's today have them in the setup, (at least the AppleVision at
> school does).  

The //c Monitor is a monochrome monitor, not color!
(Monochrome monitors use magnetic geometry corrections, not correction
coils)


> ... Also I usually short the CAPs with a piece of
> wire (from a safe distance) and wrap the wire around the leads to make sure
> it doesn't recharge some how. 

It's better to use a 100 ohm resistor.

Patrick