Re: CP/M RAM disk on IIgs

[KP <kjpmail@gmail.com>]

On Sep 12, 2:15 pm, Steven Hirsch <snhir...@gmail.com> wrote:
> On 09/12/2010 10:35 AM, KP wrote:
>
> > I am running CP/AM 40B with RAM Drive on a IIgs with a Z80+ card
> > installed.
>
> > I run the program RAMdrive and it tells me that it is emulating C:
> > with 64K available.
>
> > Adjusting the "RAM Disk" settings in the IIgs Control Panel does not
> > seem to have an effect on what the program says after I run RAMdrive.
> > The number is always 64K.
>
> Can you try a newer version of CP/AM?  I wrote some ramdisk support code for
> CP/AM, although I think 4.0B was before my involvement and might have been
> Steve Malechek's work.  I'm almost positive that later versions (5.0 and
> 5.1.x) will properly recognize IIgs memory as if it were AUX slot expansion.
>
> > My IIgs has a 1 MB Apple RAM card installed.
>
> > Is there any way to make CP/AM recognize the IIgs RAM as it would have
> > recognized (on a IIe) a RAMWorks card?
>
> If the newer code doesn't work, let me know?
>
> Steve

Will try & let you know.  Thanks!