Re: Need help with zip drive

[nathan@visi.com (Nathan Mates)]

In article <625pv5$nhq$1@nnrp1.crl.com>,
Matthew Pearce  <mpearce!nospam!@crl9.crl.com> wrote:
>When the zip drive is in the chain, the hard drive light flashes once 
>when I try to boot, then nothing. The computer then gives me the 'check 
>startup device' message.

   What SCSI ID is this HD? Remember that the GS tries to boot off the
highest ID'd device. Since your Zip can be at ID 5 or 6, I'd recommend
setting your HD to 6 and the Zip at 5, unless you want to boot off
that Zip, in which case you'd want to flip the IDs. [SCSI ID 7 is
usually selectable, but you'll get a LOT of phantom drives and other
assorted mayhem if you use that on Apple IIs]

Nathan Mates
--
<*> Nathan Mates http://www.visi.com/~nathan/      <*>
# This posting is copyright Nathan Mates, and may not be reprinted
# in full, partial, or quoted form on any archive site associated with
# Charles Turley.