[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 3.5" Drive Problem
- Subject: Re: 3.5" Drive Problem
- From: oaaland@aol.com (O Aaland)
- Date: 1997/09/20
- Newsgroups: comp.sys.apple2
- Organization: AOL http://www.aol.com
- References: <60129h$qk$1@darla.visi.com>
- Snewslanguage: English
<HTML>In article <3423C35A.28CA@mich.com>, Rich Hare <rhare@mich.com> wrote:
>I was just given a IIgs by a friend who "knew it would find a good
>home". System tests good, but the 3.5" drive doesn't work. (A
>substitute 3.5" drive works fine.
If you're not a hardware hacker type, the solution's simple-- ditch
current 3.5" drive, acquire substitute.
If getting another drive is your choice then you may first want to
take your old one out of the case and as least confirm that the interanl
cable has not become disconnected from either the circut board or the
drive itself.
If you get another drive make sure that it is an Apple 3.5, or less desirable
a unidisk 3.5. The thinner 800k external drive works on a Mac only although
you can swap the drive mechanism it self with either of the other two. Also
the internal 800k drives from Mac Plus and early Mac II's can also be a
cheaper
source for a drive rather than finding an external one.
Owen Aaland