Re: Can't configure my RamFast SCSI card

[lkhaider@concentric.net (Laer Haider)]

lkhaider@concentric.net (Laer Haider) wrote:

Here's a little more information from another e-mail, in the hopes
that it will give someone an idea as to what's going on here.

=================================================================
I have a problem with the RamFAST SCSI card that I hope you can help
with.  The RamFAST utility program is recognizing the 4 partitions of
the hard drive and the 1 or 5 partitions of the Iomega Bernoulli Box
cartridge (depending on the cartridge I have in it).  But GS/OS only
recognizes the first 2 partitions of the hard drive and nothing else.
Finder comes up displaying only /Hard1, /Hard2, and the 3.5" floppy
(when a disk is in it).  I can't access most of my information (and
the GS/OS applications) that I keep on /Hard3 and /Hard4 (my downloads
and misc. files area), nor the Bernoulli carts, which hold a lot of
misc. information and files.  All this used to work just fine until
last night.  The problems started happening after I formatted and
partitioned a new Bernoulli cartridge (something I've done several
times in the past).  Am I overlooking something?

ProDOS-8 isn't having any trouble seeing all of the partitions that
are mapped via the RamFAST; only GS/OS can't see them, neither in the
Finder nor in any GS/OS applications.  I even tried the Advanced Disk
Utility to try to reformat the Bernoulli cartridge, but no luck.  It
only sees the first 2 hard drive partitions.

My system is set up as follows:
	ROM 1 Apple IIgs.
	3.5" Apple drive
	2- 5.25" floppy drives (1 Apple and 1 Mitac)
	RamFAST v3.01f  (got this in June '96)
	105MB Toshiba SCSI HDD
	150MB Bernoulli Box cartridge drive
	4MB RAM in an OctoRAM memory board.
	TransWarp GS accelerator.
	PCTransporter
	Stereo Sound Card.
	GS/OS system 6.0.1 and using ProSel.