Re: Terminal Program

[rubywand@aol.com]

In article <578ji2$2a2@nps.navy.mil>, schooley@nps.navy.mil (Mark A.
Schooley) writes:

>
>I have a question about the SupraExpress 144 Plus Modem.
>This is a MAC Modem that connects to the IIgs modem port
>and the ADB (For power).  I have this hooked up and it 
>does work (sort of).
>
>However, I only have a DEMO version of ProTerm 3.1 and 
>my setup hangs every so often.   
>
>I am pretty sure that this is being caused by an improper
>modem initialization string.  Unfortunately, I have no
>idea what to use for the init string.
>
>I have tried all of the SupraModem drivers on the PT 3.1 
>Demo disk and some work and some don't.
>
>Where can I get a fully functional copy of PT 3.1?  How 
>much does it cost?  Also, does PT 3.1 provide a built
>in driver for this modem?  Does anyone have a similar
>setup and if so, what init string are you using?
>
>

     The ProTerm 3.1 manual lists a couple Supra modems as supported. The
list does not include "SupraExpress 144 Plus". (This does not,
necessarily, mean that your modem will not work.)

     One possible problem is getting power from the ADB. If this means the
ADB line which also goes to your KB, then you may be introducing glitches
into ADB's data I/O. Another problem could be your modem cable. For
14.4kbaud you need a "high speed" cable.

     ProTerm 3.1 lists for around $80. InTrec Software's number is shown
as 602-992-5515.


Rubywand