Re: Connecting to Ethernet

[wbaguhn@nyx10.cs.du.edu (Will Baguhn)]

In article <Pine.PMDF.3.91.961114174314.1412352A-100000@OBERLIN.EDU>,
Toby Reiter  <str4552@OBERLIN.EDU> wrote:
>There was a recent discussion in comp.sys.apple2 about methods for 
>connecting a IIgs to ethernet, and a lot of people proposed extremely 
>complicated and expensive solutions. One thing that I have seen here at 
>my college (Oberlin) has really piqued my curiousity. It is a cable which 
>connects to a serial mini din8 port, ends in what looks like a rs232 
>serial connection (male I guess) which is then attached to a female rs232 
>which then become a ethernet, cable and is plugged into an ethernet port 
>on the wall. Does anyone know what this thing is, and could it be used 
>with a IIgs? It looks like it would be incredibly inexpensive. And I 
>assume that it would be extremely easy to use under the new GS/TCP 
>utilities which are coming? in the near future.
>Also, does anyone know if Macintosh servers can be accessed over an 
>EtherTalk network? This would be nirvana for me, if this could be done. 
>
>TIA,
>Toby Reiter

Offhand, it sounds like a little tiny box that turns ethertalk packets
into localtalk packets.

Personally, I recommend spending a few bucks on a 386 with an ethernet card
and running linux on it.  Run dip on one of the serial ports, and voila...
an ethernet connection that gives you IP.  only problem is that you need to
get 2 IP numbers secured for yourself (one for the 386, one for the gs).
This could be avoided (only get one IP number) by running something
like slirp (sorry, unfamiliar with slirp's details.  my understanding
is that it "extends" the host computer's IP number, acting vaguely
like a proxy server that translates into serial connection?)

anyway.
-- 
       - Rev. SPQR                       1WSW team member and proud of it
geek code: finger wbaguhn@nox.nyx.net - http://www.nyx.net/~wbaguhn/home.html
Flavour of the day: