[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Need help with A2 mystery boards
- Subject: Re: Need help with A2 mystery boards
- From: dalloff@freenet.columbus.oh.us (Dave Althoff)
- Date: 1996/10/12
- Newsgroups: comp.sys.apple2
- Organization: The Greater Columbus FreeNet
- References: <53n3ru$sai@ns1.thpl.lib.fl.us>
Robert Sutton (sfyfsi@scfn.thpl.lib.fl.us) wrote:
: ----------
: IIe 80 Column +64K RAM
: Applied Engineering
: (C� 1983
Exactly what it says. Fits into the AUXILIARY slot of an Apple //e;
provides 80-column text and turns that there 64k machine into a 128k machine.
: ----------
: Disk ][ Interface Card
: Apple Computer, Inc.
: (C� 1978
: 650-X104
: (I know what this one does, but would like docs anyway)
I was not aware that docs even exist for that card...though installation
of the Disk ][ is covered in The DOS Manual and in the DOS 3.3 User's Guide.
: ----------
: Mouse Interface
: Apple Computer, Inc.
: (C� 1983
: 670-0030-C
: 820-0104-B (on back)
As it says...this will let you use any 9-pin Apple mouse (such as a Lisa
mouse, Macintosh pre-ADB mouse, Mouse //c, or even a ][e Mouse) on a
slotted ][. No special driver software; Apple didn't do device drivers
for the ][ until the GS came along...if the software package says
"supports (or requires) a mouse" this is what it is looking for.
: ----------
: Networker
: Zoom Telephonics, Inc.
: (C� 1983
: ASSY NO 5050503-001
: REV S/N
Not familiar with it. Sorry.
: ----------
: ROM Card
: Apple Computer, Inc.
: (C� 1978
: 600 - ______ - ___
: Has a red-handled switch, and chip (A2) missing
This is one of two things, depending on what ROM is installed. This is a
Slot 0 card for an Apple ][ or ][+. If the ROM on the card is Integer
BASIC, then the card is a ROM card for an Apple ][+ to give it ROM-based
Integer BASIC as found on the ][. If the ROM is filled with Applesoft,
then the card is for an Apple ][ and gives it Applesoft BASIC in ROM.
There may also have been a PASCAL ROM card, but I am not familiar with
that one if it does exist. The switch is to select whether the computer
will default to the card ROM or to the motherboard ROM on power-up; if you
are using DOS (Must use DOS 3.3 with a ROM card, since the machine will be
48k maximum RAM...no place for ProDOS to live), than the DOS FP and INT
commands will choose the ROM Set for you.
: ----------
: Softcard
: Microsoft
: (C� 1981
: s/n: E054223A
: Has a Z80A CPU, 4 dip switches and a red "CARD ON" LED
That's a CP/M board. In fact, I have one around here somewhere, but no
software for it.
: ----------
'Fraid I don't know the others...
--Dave Althoff, ][.
--
/-\ Celebrating the International Year of the Roller Coaster
/XXX\ /X\ /X\_ _ /XX\_ _ _ _____
/XXXXX\ /XXX\ _/XXXX\_ /X\ /XXXXX\ /X\ /X\ /XXXXX
_/XXXXXXX\__/XXXXX\/XXXXXXXX\_/XXX\_/XXXXXXX\__/XXX\_/XXX\_/\_/XXXXXX