Re: AE RGB Option ---> Mac Monitor

[spec@vax2.concordia.ca (vax2.concordia.ca)]

In article shack@deimos.frii.com (Randy Shackelford) writes...
>
>In article <dempson-0108960122330001@dempson.actrix.gen.nz>,
>David Empson <dempson@actrix.gen.nz> wrote:
>>In addition to that: the RamWorks RGB option expects a digital RGB monitor
>>(the equivalent of a CGA monitor on the PC), while the IIgs, Mac, and
>>VGA/SVGA monitors are all analog RGB.
> 
>AE made three versions of the RGB addon over the years. The first two were
>digital only; one of these had only the DB15 connector, the other had a DB15
>and DB9. Later on they made a version which had the DB9 digital output and
>a DB15 analog like you would use with a IIgs moitor.

   Does the third revision of the RGB daughterboard (analog output) work
with the original RamWorks 512K board? I have clone of the "RamWorks Basic"
card which has the expansion pins for adding an RGB option. Considering
I have a least one spare (working) AppleColor RGB monitor sitting in the
closet, I wouldn't mind tracking down this accessory for my IIe.

Mitchell Spector
spec@vax2.concordia.ca