[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Dip switch setting Grappler+ Printer card
- Subject: Dip switch setting Grappler+ Printer card
- From: buggie@argo.unm.edu (stephen e buggie)
- Date: 1996/07/09
- Newsgroups: comp.sys.apple2
- Organization: University of New Mexico, Albuquerque
- References: <4rmlcl$1fp@delta.aei.ca>
I have a fistful of owners manuuals for GRAPPLER PLUS parallel printer card.
If you want one, then send $2.00 for the manual, including shipping
within the U.S.
Steve Buggie
UNM-Gallup
200 College Rd.
Gallup NM 87301
: The printer card is a Grappler+ Printer interface made by
: Orange Micro Inc, On it there is a bank of 4 dip switches.
: Guy Gagnon