Re: Apple 2 proto boards

[arturj@thymaster.interaccess.com (Artur Jasowicz)]

Erick Wagner (wagnere@netcom.com) wrote:
: brianmcg@interaccess.com (Brian V. McGroarty) wrote:
: >I am looking for a source for Apple 2 prototyping boards.  Something with
: >the Apple2 card edge, with or without any basic decoding/support circuitry
: >in place, would be great.

: I would be interested in these as well.  Please post so everyone
: can see :)

: Erick

In my designs I used regular IBM XT (8 bit) extension card. Since IBM is
using more connection pads on edge connector, I had to cut some of them off.
XT extension boards are available from Radio Shack. The power traces on them
are connected to corresponding pads on edge connector. You may have to 
modify that. The boards I used didn't have power pads connected to traces 
on the rest of the board. 

What do you want to put on these boards?

--
--             Artur Jasowicz               --
--          arturj@interaccess.com          --
-- http://homepage.interaccess.com/~arturj/ --