[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: RAMfast to SCSI cable

Subject: Re: RAMfast to SCSI cable
From: danb@a.crl.com (Dan Brown)
Date: 1995/12/10
Newsgroups: comp.sys.apple2
Organization: CRL Dialup Internet Access
References: <4a44d8$l7p@newsbf02.news.aol.com> <4acd19$l9o@newsbf02.news.aol.com> <DJCyJ1.MAx@actrix.gen.nz>
Reply-to: danb@a.crl.com

dempson@atlantis.actrix.gen.nz (David Empson) wrote:

> to minimise noise being picked up or radiated.  You should definitely
> not use a ribbon cable.

	According to Harold Hislop and Doug Pendleton on GEnie, both
of whom seem _very_ knowledgable in SCSI-related issues, ribbon cable
is exactly what's specified in the original ANSI specs.  However, this
refers only to 50-50 cables; wiring a 25-50 using IDC connectors would
be hideous.

--
Dan Brown, KE6MKS
danb@a.crl.com, NOT danb@crl.com
Don't tread on me.
E-Mail published at my discretion.

Follow-Ups:
- Re: RAMfast to SCSI cable
  - From: david@wyvern.cc.uow.edu.au (David E A Wilson)
- Re: RAMfast to SCSI cable
  - From: dempson@atlantis.actrix.gen.nz (David Empson)

References:
- Re: RAMfast to SCSI cable
  - From: rubywand@aol.com (RUBYWAND)
- Re: RAMfast to SCSI cable
  - From: dempson@atlantis.actrix.gen.nz (David Empson)

Prev by Date: Re: RAMfast to SCSI cable
Next by Date: Help needed with Timemaster II H.O. card
Previous by thread: Re: RAMfast to SCSI cable
Next by thread: Re: RAMfast to SCSI cable
Index(es):
- Date
- Thread