Re: Zip Chip ][e vs. RamFAST

[Robert Furman <robert8646@delphi.com>]

John Donald Baker <jdb8042@tam2000.tamu.edu> writes:
 
>
>As I've seen a couple of other people mention, the conflict
>between the RamFAST and the Zip Chip can be solved only by
>having your board modified by Sequential.
>
>Most high-speed 65C02's and the 65802 in emulation mode do
>not obey the RDY signal on a write (like the original 6502).
>The RamFAST expects the CPU to obey the RDY signal on both
>reads and writes.
 
 
>
>The modification involes a trace cut, a jumper installed
>and a revised fuse map for the PAL that's nearest the Apple
>bus connector.
>
>I had my RamFAST Rev. C so modified when I installed a 65802
>in my //e.
 
This is all and good, but as I've been told by several people the Rev D has
no such modification. Is there no way around this but to get a Rev C card?
 
Robert