Re: Syquest problems

[butch@netcom.com (G.Sanchez)]

Wes Paster (wp@pro-palmtree.cts.com) wrote:
: I have an annoying problem with my syquest removable 44 & Ramfast. For some
: unknown reason the syquest doesn't remember (save) the settings and each
: time I boot up I have to go into Ramfast Utilities and make my Syquest
: active. Everytime. It doesn't seem to remember the settings.

Well its not the syquests fault it could be a RamFast problem but I doubt 
it. Here is what I do and it works all the time. Before you turn on your 
computer, you need to turn on the Sysquest WITH the cartrige loaded and 
ready to go. Once that is done, then turn on your computer and everything 
should be fine. If you need to exchange cartriges, that will not be 
aproblem at all. Just don't throuh it in the trash in GS/OS because if 
you do, RamFast has a nasty little 'feature' that takes the sysquest 
off-line once that is done and the only way to get it to recognise it 
again is to trun off the sysquest and turn it back on again. The way to 
exchange cartriges with going through this little ANNOYING (hint hint) 
problem is to press the eject button, then take the cartrige out (wait 
untill is stops spinning oviously) then drag the icon to the trash. Hope 
this helps ya.


Gabe

  ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
  :: Mr.Butch Sysop of The Micro Exchange     :: o RamFast Speed          ::
  :: 714-992-4520  2400 - 28.8k Dual Standard :: o 15 Mhz 64 Cache Zip GS ::
  :: Email - Mr_Butch@exchange.calif.fnet.org :: o Much more              ::
  :: Email - butch@netcom.com                 :: NUP -> APPLE4EVER        ::
  ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
 
              "O.K. Scotty, real funny. Now beam down my clothes!"