Re: Ramfast/ Transwarp II Problems

[tdiaz@coyote.csusm.edu (Tony Diaz)]

Chet Gerhardt (gerhardt@global.california.com) wrote:
> Have you heard of anyone having Ramfast problems with a Transwarp II?

> I can't get these two cards to work together in my IIe. Right now I have a
> platinum IIe, 1.5 Meg, Transwarp II and the Ramfast (2.01).  The only problem
> is that I cannot get both the Ramfast and the Transwarp II to work together.
> All is configured correctly, DMA is off.  I keep getting odd errors statements

Which RAMFast? (Rev C or D)

I have used a Rev D RAMFast in my //e, equipped with a Transwarp II and had
no problems. The major difference is I have a 65802 on the Transwarp II.

I have a Vulcan 20 installed now as I figured I'd use the RAMfast in a IIgs.

The computer is as follows:

Apple //e 1982 Rev B board with Enhanced ROMs on it
3 Meg RAM
S1 Networking Card
S2 SSC
S3 Transwarp II
S4 Phasor
S5 FDHD Card
S6 Switch-a-slot w/OKS Multicache, SlotBuster I/O, or Disk II Card selectable
S7 Vulcan 20

The RAMFast Rev D worked fine before the Vulcan was added and this was on an
original Apple power supply too.

--
  tdiaz@coyote.csusm.edu  --  Now Showing:  Second Sight on a IIgs near you!
"Yeeeeeeeeeeeaaaaaaaaaaaaaaaaaaaoooooooooooooooowwwwwww!" -- Apr 29th 10:30 AM
Apple ][, //e, IIgs, //c, //c+ - Discover Cortland! The Power ][ Be Your Best!
Atari 26/52/7800-Intv-Vectrex-O2-Astrocade-XEGS-ColecoVision/ADAM-APF-ChannelF
Apple II & Classic Gaming BBS:  The SpaceBar  619/433-4653  (USR v.Everything)