Re: II GS power

[sbehrens@contech.demon.co.uk (Soenke Behrens)]

Mike,

In article <3fmt4c$ppd@hydra.acs.ttu.edu>
           RIMJB@ttacs3.ttu.edu "Bartell, Mike" writes:

> I was wondering if anybody out there could help me.  I have a IIGS that is now
> sitting in an IBM PC mini-tower case.  My problem is that I would like to use
> the PC power supply.  All the voltages required for the GS mother board are
> there, but I am not sure about the amperage.  Can I just plug it in? Should I
> adjust the amperage, if so, how?

Since the GS connector is hard to get, what I did was to cut it off the
original GS power supply, then cut the connectors off the tower supply,
and then solder everything together. As long as you don't switch say,
+5 and +12 :), you will be fine.

> computer is, and with a SVGA monitor and a 101 key keyboard, I could really
> keep them guessing.  

How'd you connect the keyboard?

Soenke

-- 
Standard disclaimer: My opinions are my own, not those of my employer