[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: SCSI Termination Problems?

Subject: Re: SCSI Termination Problems?
From: dempson@atlantis.actrix.gen.nz (David Empson)
Date: Fri, 13 Jan 1995 21:51:38 GMT
Newsgroups: comp.sys.apple2
Organization: Actrix - New Zealand Internet Service Providers
References: <x6wYp6o.bradbuchner@delphi.com> <3f6cq9$q7j@post.gsfc.nasa.gov>
Sender: news@actrix.gen.nz (News Administrator)

In article <3f6cq9$q7j@post.gsfc.nasa.gov>,
Bill North  <north@spso.gsfc.nasa.gov> wrote:
>
> With my High-Speed SCSI i _always_ have the first and last devices 
> terminated, ignoring whether the card itself is terminated.  The
> manual claims it is, but I can't find any resistor looking components
> on the card. 

Three single-in-line (SIL) resistor packs in yellow.  They are quite
visible at the back of the card.


-- 
David Empson
dempson@actrix.gen.nz
Snail mail: P.O. Box 27-103, Wellington, New Zealand

References:
- SCSI Termination Problems?
  - From: Brad Buchner <bradbuchner@delphi.com>
- Re: SCSI Termination Problems?
  - From: Bill North <north@spso.gsfc.nasa.gov>

Prev by Date: Re: Can a GS start up by just pressing the reset key?
Next by Date: Re: Can a GS start up by just pressing the reset key?
Previous by thread: Re: SCSI Termination Problems?
Next by thread: Apple's appearance in films (was Re: Atari's appearance in films. =^)
Index(es):
- Date
- Thread