Re: Printer Cable Needed!

[bryanv@aloha.com (Bryan G. Villados)]

In article <lu31735@pro-ssor.cts.com>, sturner@pro-ssor.cts.com (Sean
Turner) wrote:

> I am in need of a cable that will go between an Apple ][ Parallel Interface
> Card, and a "Centronics" 36 pin parallel printer. I cannot for the life of
> me find this cable up in these woods, so if anyone is handy with a
> souldering iron, I would be willing to pay for having the cable made. Here
> are the pinouts as read from the A2 PIC manual, copyright 1982.
> 

If the DB-25 connector on the cable is a male connector, it sounds like
you could use a PC-compatible parallel cable. The only other printer cable
I've seen is a ribbon cable-type, which you could pick up from Radio Shack
(it's the same cable as the TRS-80 Model 100)