Re: Seal material for locking screws............

[A2Aviator <a2aviator@gmail.com>]

On Feb 2, 4:03 pm, dog_...@macgui.com (D Finnigan) wrote:
> A2Aviator wrote:
> > The problem with nail polish is .. it tends to be permanent.
>
> Not even with nail polish remover?

On a potentiometer? ..and perhaps have some of the loosened material
flow into the mechanics of the part? No thanks. When that hardens
again, you can almost be sure thats the last time you are going to
adjust that.

The whole conversation is slightly overkill anyway, we're talking
minscule amounts, yes it can be cracked loose, but the principal of it
is that compounds generally used for this purpose can be flicked off
with a scribe tool in a second, and leave for all intents, no trace of
their prior existence.

A dab from a glue gun falls into the same category. It's easily
removed by just plucking it right off.

Nail polish on the other hand could prove a little more challenging if
one wanted to actually remove it, and certainly would be more
challenging to get out of the slot on many pots thus potentially
rendering it hard to turn due to the lack of the ability to put a tool
into the slot. Pressing on some of them to dig out the hardened
compound could also ruin or at least change the physical behavior in
such a way that it would not work either.