Re: ZipGS and PC Transporter

[st3b1@jetson.uh.edu (Fretz, David)]

In article <CuuIp5.7x2@freenet.carleton.ca>, ad657@FreeNet.Carleton.CA (Michel Bois) writes...
> 
> Help!
> 
>I seem to be having problems with my PC Transporter and
>Zip GS 10MHz/64K cache. For a while I had my PC Transporter taken out.
>During that time I purchased my Zip GS. I finally had the time
>to properly reinstall the PC Transporter. After the initial ram check
>after running the transporter, the screen would seem to go black with
>some grey bars across my screen like it lost horizontal lock.
>The only thing came to mind was that this problem didn't occur before
>installing my ZipGS. So I removed the ZipGS and tried the PC Transporter
>again and no problems this time.

I had a similiar problem with my PCT a while ago.  I had just gotten a used 
WOZ Rom 01 machine and I wanted to transfer the PCT to it.  Well when I started
it the monitor had a hard time trying to sync to the color switch.  This was 
on an unaccellerated GS BTW.  I could hear the drive booting and all.  Well 
when I put it back on my origianl GS it worked fine monitor and all.  The 
motherboards between the two GS's were only a couple of months apart.  The only
difference between the two is that the capacitors on the bottom for manufacture
fixes where going to two different places.  The Woz motherboard works well for
everything else though.

********************************************************************************
  University of Houston    | "And so we are told this is the golden age
                           | and gold is the reason for the wars we wage." (U2)
  GS Games SIG Coordinator | Houston Apple Area User Group  Apple II Forever!
********************************************************************************