ZipGS and PC Transporter

[ad657@FreeNet.Carleton.CA (Michel Bois)]

 Help!
 
I seem to be having problems with my PC Transporter and
Zip GS 10MHz/64K cache. For a while I had my PC Transporter taken out.
During that time I purchased my Zip GS. I finally had the time
to properly reinstall the PC Transporter. After the initial ram check
after running the transporter, the screen would seem to go black with
some grey bars across my screen like it lost horizontal lock.
The only thing came to mind was that this problem didn't occur before
installing my ZipGS. So I removed the ZipGS and tried the PC Transporter
again and no problems this time.
 
Here's my setup:
 
Apple IIGS ROM 01
 
Slot#   Slot setting    Slot Peripheral         Port Peripheral
1       Your Card       Printer
2       Your Card       Audio Animator          2400 Modem
3       Built in Text   Zip GS
4       Mouse port      Quickie Hand Scanner
5       Smart Port                              3.5" drive
6       Your Card       PC Transporter          5.25" drive
7       Your Card       Apple HS SCSII
 
I use a color switch for the PC Transporter for CGA capabilities.
 
Is there a trick in getting the two to work together. I tried disabling
the Zip before running the PCT, even setting all slot speeds to normal.
Nothing seems to work. Sigh!!
 
Michel
  

--
=============================================================================
Name: Woody (Michel Bois)                                   Apple II Forever! 
Internet: ad657@Freenet.carleton.ca                       
=============================================================================