Re: Help reviving II+

[philip@labtam.oz.au (Philip Stephens)]

Dan P. Scholnik writes:

>	A friend and I were working on an interfacing project for my II+
>(48K ram, 16K ram card, 2 disk drives, dos 3.3), and while I was not present,
>he removed the card while the power was on. Now, of course, when it is turned
>on, nothing happens. What I need to know, is what blew?

  Unfortunately, these things are never predictable :-)
  Over the years I've accidently removed cards from an Apple ][+ twice while
the power was on, and both times something different blew up.  So there isn't
much you can do other than check each and every component on the board, I
don't think!



-- 
=========== Philip Stephens, Systems Programmer, Labtam Australia ============
====== Owned by Motor (Mo for short), the power-purrer from Down Under =======
=== DS (B+S)t Y 2 X L  W C+++ I T+++ A+ E H+++ S+ V+ F Q+ P++ B+ PA+ PL+++ ===
"Many views yield the truth.  Therefore, be not alone." -- Viggies' Prime Song