[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: help: Koala pad/connector info

Subject: Re: help: Koala pad/connector info
From: david@zircon.cs.uow.edu.au (David E A Wilson)
Date: 9 May 1994 12:12:03 +1000
Newsgroups: comp.sys.apple2, comp.sys.apple2.programmer
Organization: University of Wollongong, NSW, Australia.
References: <2ps47f$2vh@magus.cs.utah.edu> <1994May5.230112.1@csc.canterbury.ac.nz> <1994May8.010134.29740@csc.canberra.edu.au>
Xref: bga.com comp.sys.apple2:5956 comp.sys.apple2.programmer:1000

u901841@student.canberra.edu.au (Hickey / Michael Gerard (ISE)) writes:
>The 16 pin connector inside an Apple II, +, e, GS (NOT IIc) has pinouts
>thusly: 

>1	+5 volts (not more than 100ma)
>2	Paddle button 0
>3	""""""""""""" 1
>4	""""""""""""" 2
>5	strobe output (line goes low when read or write of location $C040)

According to what I have read, the //gs port does not have the $c040 strobe -
pin 5 is always high.

References:
- help: Koala pad/connector info
  - From: galt@asylum.cs.utah.edu (Greg Alt)
- Re: help: Koala pad/connector info
  - From: misc176@csc.canterbury.ac.nz
- Re: help: Koala pad/connector info
  - From: u901841@student.canberra.edu.au (Hickey / Michael Gerard (ISE))

Prev by Date: Re: ECON Technologies...
Next by Date: Re: SCSI connections
Previous by thread: Re: help: Koala pad/connector info
Next by thread: Re: help: Koala pad/connector info
Index(es):
- Date
- Thread