[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Help with IIe 1meg SuperExpander Ram Card

Subject: Help with IIe 1meg SuperExpander Ram Card
From: teke@milton.ccs.itd.umich.edu (Jeff W. Schroeder)
Date: 8 May 1994 11:55:57 GMT
Distribution: world
Newsgroups: comp.sys.apple2, comp.sys.apple2.programmer
Organization: U of Michigan, Ann Arbor
Xref: bga.com comp.sys.apple2:5892 comp.sys.apple2.programmer:986

Once agin a good friend of mine has unloaded yet another box full
of his old apple II stuff on me.  I was excited to find a copy of
Publishit 4 and its associated manuals within the box.  My IIe 
has a SuperExpander 1 Meg ram/80col card installed in the Aux slot.
When I boot up Publishit 4 and check the status from the main menu
it indicates that I have only 29k of memory available.  This makes
the program close to useless.  I have tried all of the memory 
configuration options with no luck.  My ram card came with a disk
containing some patch routines for appleworks thru v 3.0, and GEOS.
None of .these seem to appy to Publishit 4.  Most of my other programs
including proterm 3.0 Appleworks 3.0 and Copy II+ all recognise
and use the card.   

Any light someone could shed on ths matter would be appreciated!

Thanx

Teke

Prev by Date: Wanted: QUANTUM's address/es
Next by Date: Publishit 4 won't recognise my Ram card
Previous by thread: Wanted: QUANTUM's address/es
Next by thread: Publishit 4 won't recognise my Ram card
Index(es):
- Date
- Thread