Re: Imagewriter I help needed

[neiderma@er1.rutgers.edu (Kid)]

>>I have come across an ImageWriter I with a dedecated serial board for
>>it.  Neither Bank Street Writer or AppleWorks will print from the
>IIe to the printer, it accepts no commands.  There is a DIP switch
>block on the card, does anyone know what the settings should be?  I
>thought it was a Apple Serial card or Super Serial, but it doesn't have
>>any short connector, it just has a cable coming right from the card
>>(it's about 2' long) to the printer.

>Are there any markings or writing on the board?  Does it have the
>words

There are no words at all on the card, other than a little "Apple" if
I recall correctly.  Definitely nothing saying "Super Serial Card" or someting.

>Finally, have you tried doing a PR#1 at the BASIC (``]'') prompt? 
>[This assumes you have the printer card in slot 1--if it's in
>another slot, 2

Well, from using Copy ][+ v8.4, I tried to dump a catalog to slot 1 and
the computer crashed (lucky the program lets you to a RESET and you're
back in business). Then I tried slot 2 and nothing happened.  I visually
looked where the card was plugged in, and it's in #1.

Can anyopne from Apple shed some light on what's happening?