[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Applesoft question

Subject: Re: Applesoft question
From: uerics@mcl.ucsb.edu (Eric Shepherd)
Date: 19 Apr 1994 19:30:25 GMT
Newsgroups: comp.sys.apple2
Organization: University of California, Santa Barbara
References: <18APR199421333052@alpha.sunquest.com> <CoI3FD.7MA@actrix.gen.nz>

PR#0 doesn't actually work for switching from 80-column to 40-column
mode.  It simply reconnects the video firmware to the BASIC input and
output vectors.  In other words, it returns you to the same video mode
you were last using (either 40 or 80 column).


--
sheppy@aol.com            |-------------- Eric Shepherd ----------------
uerics@mcl.mcl.ucsb.edu   |Programming Law #21: Never put your faith in
powerpc.pro@genie.geis.com|rules -- breaking them is half the fun!
sheppy@cs.ucsb.edu        |[Apple II Forever]  [PowerPC Programmers' RT]

Follow-Ups:
- Re: Applesoft question
  - From: charlesc@pro-haven.cts.com (Charles Claypoole)

References:
- Applesoft question
  - From: rjd@alpha.sunquest.com (Robert J. Dull)
- Re: Applesoft question
  - From: dempson@actrix.gen.nz (David Empson)

Prev by Date: Re: Deskjet 550C to AppleIIgs
Next by Date: Re: Matt Deatherage (was Very Sad, but...)
Previous by thread: Re: Applesoft question
Next by thread: Re: Applesoft question
Index(es):
- Date
- Thread