[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Hardware set up

To: comp-sys-apple2@crash
Subject: Hardware set up
From: sauls@pro-att.cts.com (Saul Schwartz)
Date: Thu, 31 Mar 1994 17:36:21 GMT
Newsgroups: comp.sys.apple2
Organization: ProLine [pro-att] -- chi, il
Sender: news@crash.cts.com (news subsystem)

I would like to use my IIGS connected to both my Imagewreiter II and my 
Deskjet 500. Does this sound like it will work?

A Grappler Parallel card in slot 1 connected to the Deskjet
A serial connection to the imagewriter II through the IIGS serial printer port
Using Harmonie's Grappler driver for GSOS programs
For Prodos8 programs (appleworks) just treating the Grappler as a 
     regular parallel card
Using the Control Panel to switch between "your card" and printer port to
     switch between printers.

OK?
Will this give me the best of both worlds?

Prev by Date: Re: Apple DES program
Next by Date: Re: cross assembler sought
Previous by thread: Re: Password Protection
Next by thread: Re: Hardware set up
Index(es):
- Date
- Thread