Slot layout recommendation

[abrnic@sctusy1.sctcorp.com]

Hi,

  Hope someone can help.  I used to have my SCSI card in slot 7, but started
using Appletalk and now I had to move my card to another slot.  I put it into sot 6 which had a controller for by disk II drives.

I still use them once in a while.  My dilema is that I have stuff in every slot
except slot 4.  Slot 4 is blocked by the cable from my ZipGS.

Here is what I have.

Slot 1 - Using printer port.
Slot 2 - Using modem port and have Sonic Blaster installed.
Slot 3 - ZipGS.
Slot 4 - Nothing, but cable is in the way and can't fit Sonic Blaster or SCSI
	 board here because there cables are too big to fit between the cards.
Slot 5 - Using smartport.
Slot 6 - Using Disk II controller.  Have 2 drives connected to this.
Slot 7 - Using SCSI controller, but want to use AppleTalk.
Expansion Slot has Memory board.

Give me any suggestion either rearranging the boards or possible a board
that combines tasks.  I have tried different configurations, but always end
up with an extra board.  That I can't fit into an empty slot.

Tony
:-(