Re: 3.5" SCSI H-Disk in Disk ][ casing

[sebugg@CS1.PRESBY.EDU (Stephen Buggie)]

Dear Dan,

Thanks for the info.  I have installed the power switch on the Disk ][ 
back side, and have drilled the two LEDs in the black plastic front 
panel.

AMPERAGE:

The Seagate HH hard disk requires 2.0 amps on the +12v line, but the IIe
power box is rated at just 1.5 amps on that line.   Am HOPING that the 
1.5 amp limit is flexible because the +5v line will be loaded to nowhere
near its limit......


I expect to assemble "HARD DISK ][" in about two weeks when the SCSI internal
harness of two SCSI connectors and ribbon cable arrive here from Alltech.

Regards,   sebugg


 **=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=**
 ** Stephen Buggie  Psych Dept  Presbyterian College   Clinton SC 29325 **
 ** sebugg@presby.edu                 voice: (803) 833-8337 or 833-1632 **
 **           The Apple ][ Pledge:  Never to mess with MS-DOS           **
 **=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=**