[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: What use is a Taxan Monitor? Apple2? Vcr Monitor?



In article <2eo9sl$m1k@wraith.cs.uow.edu.au>,
David E A Wilson <david@wraith.cs.uow.edu.au> wrote:
>valthoff@magnus.acs.ohio-state.edu (Victoria M Althoff) writes:
>>>    Another a flat connecter similar to this:
>>>         ______---_____
>>>        |  * * *  *    |
>>>        |  * * *  *    |
>>>        |______________|
>
>>That big rectangular connector is a 'classic' VCR connector.  Those eight pins 
>>include Audio IN, Audio OUT, Video IN (NTSC), and Video OUT.  That particular 
>>connector was often used for industrial and professional VCRs.  The upshot of 
>
>No, this is an RGBI connector (TTL signal levels). The pins are:
>
>1	Intensity	5	Gnd
>
>2	Red		6	Gnd
>3	Green		7	+ H Sync
>4	Blue		8	+ V Sync
Those are the correct pins, in fact I removed my IIgs connector module
from my RGB Color and pluged wires into the board addapter and I got
the taxan to show a nice image. I don't have such a connector, but
I would like to get one. In fact I would appricate any information 
on where I could get a cable made for the IIgs and the Taxan so my IIgs
would have a better monitor with it. I would perfer a square cable like
the one above. It would be mice to know if anyone has gotten a cable
like this before. Where I can get it and stuff?


-- 
____________________________________________________________________________
Tmoh Research    Internet: jspinnow@netcom.com     Phone:    (414) 761-1537
John S. Pinnow             jspinnow@world.std.com  Disclaim: Opinions==Mine