Re: Modem/Kermit for IIC?

[bchurch@oucsace.cs.ohiou.edu (Robert Church)]

In article <C7t4rq.BB0@trystro.uucp> rick@trystro.uucp (Richard E. Nickle) writes:
>I used to use a modem on one of these things, using a 1200bps
>modem, a special cable I built (the //c has another one of those
>idiotic non-standard serial ports -- 5 pin din.  All i remember
>about it is GND is the middle one.).
>
>That port alledges to be able to support 9600bps, but in my
>experience, 2400bps is the max. 

I've done 19,200 bps transfers from my //c using kermit and (obviously)
serial port to serial port connections. I don't know about handshaking to
a 9600 baud modem though. Would the cabling be different than for a 2400?

Bob